Requirements; Installation; Attach The Mounting Plate To A Wall - StarTech ARMWALLDS Guide De L'utilisateur

Requirements

• A monitor or display that is compatible with one of the VESA mounting hole
patterns that ARMWALLDS supports
• A Phillips screwdriver
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/ARMWALLDS.

Installation

Attach the mounting plate to a wall

Warning! Wall structures vary, and it is important that you make sure that the type
of structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so may result in personal injury and/or equipment
damage. The wall structure should be capable of supporting at least four times the
weight of the mounted equipment.
Warning! The mounting hardware included with this product might not be adequate
for some wall structures. If you lack the necessary expertise to attach this product
to the wall that you are using, contact a construction professional to install the
ARMWALLDS or to provide specific mounting instructions for your wall structure.
1. Use the holes in the mounting plate as a template and use a pencil to mark the
location on the wall where you want to attach the wall mount. (figure 1)
2. Follow the appropriate steps for the type of wall that you're using and attach the
mounting plate to the wall.
figure 1
Instruction manual
5
Mounting plate