Mount The Tablet Arm On A Wall - StarTech ARMTBLTDT Guide De L'utilisateur

Mount the tablet arm on a wall

Warning! Wall structures vary, and it is important that you make sure that the type
of structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so may result in personal injury and/or equipment
damage. The wall structure should be capable of supporting at least four times the
weight of the mounted equipment.
Warning! The mounting hardware included with this product might not be adequate
for some wall structures. If you lack the necessary expertise to attach this product
to the wall that you are using, contact a construction professional to install the
ARMTBLTDT or to provide specific mounting instructions for your wall structure.
1. Use a level to orientate the wall plate vertically.
2. Use the holes in the wall plate as a template and use a pencil to mark the location
on the wall where you want to attach the tablet arm. (figure 4)
3. Follow the appropriate steps for the type of wall that you're using and attach the
tablet arm to the wall.
figure 4
Instruction manual
Wall plate
5