Mount The Rear Bracket To The Wall - StarTech CPUWALLMNT Guide De L'utilisateur

2. Separate the front bracket from the rear bracket. (figure 2)
Note: Put the washers in a safe place because you will need to use them later in the
assembly process.
figure 2
Front bracket
Rear bracket
Washers

Mount the rear bracket to the wall

Warning! Wall structures vary, and it is important to make sure that the type of
structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so may result in personal injury and/or equipment
damage. The wall should be capable of supporting at least four times the weight of the
mounted equipment.
Warning! The mounting hardware included with this product might not be adequate
for some wall structures. If you lack the necessary expertise to attach this product to
the wall that you are using, contact a construction professional to install the CPU wall
mount or to provide specific mounting instructions for your wall.
Instruction manual
5