Table des Matières
Publicité
Docking Station Control Panel/Scheduling
A. To Program the Current Time:
- Press "Set" once, "SET CLK" will start to flash.
for 15 secs)
-
Then press "Select", this will make the hour flash.
Set the hour by pressing "+" or "-" until you reach the
desired time.
**Uses Military time only.
Press "Select" again and the minutes will flash.
-
Again press either "+" or "-" until you reach the
desired time.
- Next, set the current day by pressing "Select" again,
and pressing "+" or "-" to scroll through the days of
the week.
- Lastly, press "Select" one last time to finalize the
setting, or press "Set" to program the cleaning
schedule & "Set" will blink.
Format of schedules:
a. Once a week (Any 1 day of the week light on).
b. Work everyday (Su-Sa light on).
c. 5 days a week (Mo-Fr light on).
C. Docking Station Icons:
- "SET CLK" Set Clock flashes for 15 secs when "Set"
is pressed.
- "SET" Set Cleaning schedule icon flashes for 15 secs
when the "Set" is pressed twice.
-
When shown solid, indicates there is a cleaning
schedule set to go off automatically at the
programmed time.
-
Charge battery icon displays when the
SmartClean is attached to the charging dock.
It displays whether charging or full.
B. To Program Cleaning schedule:
- Press "Set" until "
" starts to flash.
(only
- Then press "Select", this will make the hour flash.
Set the hour by pressing "+" or "-" until you reach the
.
desired hour
**Uses Military time only.
Press "Select" again and then the minutes will flash.
-
Again press either "+" or "-" until you reach the
desired time.
- Next, set the desired cleaning day or days by
pressing "Select" again, and pressing "+" or "-" to
scroll through the days of the week. There are 5
settings.
(Five Format Schedules are available, listed in the
box below)
- Lastly, press "Select" one last time to finalize the
schedule. Broom icon will show when the cleaning
schedule is set to go
- Press "Set" twice to view the schedule at any
time.
d. 6 days a week (Mo-Sa light on).
e. 2 days a week (Su and Sa light on only.
-
Current time and day when solid.
- "SET" Changes between current time/day, setting
clock/day, or setting cleaning schedule.
- "SELECT" Scrolls between hour, min, and day when
setting clock or cleaning schedule.
- "+" "-" Scrolls within the hour setting, minute
setting, or day setting when setting the clock or
cleaning schedule.
www.BISSELL.ca
(only for 15 secs)
11
Publicité
Table des Matières
