Cleaning The Sensors; Cleaning The Side Brushes - Bissell SMARTCLEAN 1605 Série Mode D'emploi

Cleaning the Sensors

After repeated use, dirt and
dust can accumulate on the
sensors of the vacuum and
the working efficiency can be
reduced.
To ensure the best efficiency,
the sensors should be cleaned
off periodically by brushing any
dirt or debris from them.
Before cleaning the sensors,
ensure the robot is not attached
to the charging cable or dock
and the power switch is in the
off position.

Cleaning the Side Brushes

Turn off the power. Place
After being used for a bottom of the cleaner
period of time, the upward on a flat surface.
brushes need to be Hold the brush bristle and
cleaned to work more pull upward to remove the
effectively. brush.
www.BISSELL.ca
16
The side brushes can be rinsed
and if they become crooked,
you can soak them in hot
water to make them return to
the original shape. Place the
brushed back in after they have
completely dried.