Enodtouch Option : User Interface - Scaime eNod4-Box Ethernet Guide Rapide

8 ENODTOUCH OPTION : USER INTERFACE

8.1 Enter in Offline mode

At Power ON
Touch the upper right corner or upper left corner (within 40 pixels of the edges) of the panel for at least 3 seconds soon after the
startup screen is displayed.

When Operating
Touch the upper right then bottom left corners, or the upper left and bottom right corners of the panel (within a 40-pixel area)
within 0.5 seconds.
When the system menu is displayed, touch the [Offline] button
8.2 Settings in Offline mode
After entering in Offline mode, eNodTouch displays a menu allowing consulting and modifying the eNodTouch settings
8.2.1 Main Unit menu
Menu Input Parameter
Initial screen Number
Standby mode setting
Screen setting
Standby Mode time
Change to Screen N° in
Standby Mode
Description
Number of the screen that displays at startup
Select the standby mode from [None], [Screen
OFF], or [Screen Change].
set the time from 1 to 255 minutes after which
the screen is cleared
Related to [Screen Change] Standby mode
Quick Start Guide SCAIME:
29
NUSG-eNod4-ETH-BOX-FE-246776-A.docx
Default
9
[None]
1
1