1 USER MANUALS AND SOFTWARE
Detailed user's instructions and 'eNodView' setting up and signal processing software can be downloaded from our web site:
http://www.scaime.com.
These parts can be ordered to our sales department.
2 SAFETY INSTRUCTIONS
Important information
Be sure to read this manual thoroughly before starting the PRODUCT. This manual is part of the PRODUCT and comes with it. Rules
for the prevention of risks and accidents as well as safety rules must be observed!
The PRODUCT is manufactured in accordance with the current state of the art and in accordance with safety regulations laws of
the Labour Code.
The general safety requirements must be observed during all phases of operation and repair of equipment. Non-compliance of
written warnings in this manual is contrary to the requirements of safe operation and normal operation of the PRODUCT.
As a user of this product, it is necessary to strictly follow in your work environment, all warnings and requirements necessary to
perform safely any operation on the PRODUCT.
This symbol means that there is a risk of electrisation that can lead to death or serious injuries instructions are not
followed.
This symbol means that there is a risk of danger that can lead to injuries if safety instructions are not followed.
Earth protection connection
WEEE 2002/96/CE Waste of electrical and electronic equipment directive imposes to final users the management
of electrical and electronic equipment (EEE). For the purpose, it is mandatory for them to selectively collect their
EEE depositing them in dedicated places.
Danger: dangerous situation that can lead immediately to death or serious injuries.
Warning: situation potentially dangerous that could lead to death.
Cautious: situation potentially dangerous that could lead to injuries.
2.1 Getting started
Security provided by this product is provided for use for its intended purpose. Maintenance can only be performed by qualified
staff.
DANGER
WARNING
CAUTIOUS
WARNING
Quick Start Guide SCAIME:
19
NUSG-eNod4-ETH-BOX-FE-246776-A.docx