Password Menu - Scaime eNod4-Box Ethernet Guide Rapide

8.2.3 Peripheral – Device PLC Settings
Menu Input
Communication
Device
Note: Never change the parameters in grey

8.2.4 Password menu

Menu Input
System Password
Security Password
Note: Never change the parameters in grey
8.2.5 Initialize menu
Menu Input
User memory
Backup Data
Note: Never use the commands in grey: You'll lost the SCAIME eNodTouch application
Parameter Description
SIO Type Set the Communication type
Communication Speed : Should be set
Speed
according to eNod4 communication settings
Data Length
Parity
Stop Bit
Flow Control
Time out (s)
Retry
Wait to send (ms)
Device Name
Slave Address eNod4 slave address : Should be set according
(Decimal) to eNod4 communication settings
Max. Query Read Input
Reg.
Max. Query Read
Holding Reg.
Max. Query Write
Holding Reg.
Parameter Description
The password setting is used when changing
System Password to the Initialize Memory or offline mode
screens.
Security Password Not used
Action
Deletes all data in the display unit's internal memory.
Enter System password to operate
Clears all the data stored in the display unit's backup memory.
Enter System password to operate
Quick Start Guide SCAIME:
31
NUSG-eNod4-ETH-BOX-FE-246776-A.docx
Default
RS422/485 (2wire)
9600
8
[None]
2
[None]
1
1
10
eNod4_1 - eNod4_6
1 - 6
30
30
30
Default
-
-