Enodview: Setting Up And Signal Processing Software; Embedded Webserver - Scaime eNod4-Box Ethernet Guide Rapide

•
When communication is established the main screen of eNod4 appears:
For more information and details about the menus, please refer to the user manual.

9 ENODVIEW: SETTING UP AND SIGNAL PROCESSING SOFTWARE

eNodView software is useful to:
• Do a remote control of eNod4
• Calibrate the system
• Save / Change all parameters
• Display graphically measurements
• Simulate digital filters
• Do a frequency analysis (FFT)
• Release Y is compatible with :
- all eNod4 T, C, D release
- only 2.09 or 1.06 eNod4 B & F

10 EMBEDDED WEBSERVER

An embedded web server is available for setting up. It is accessible via the web browser installed on PC or another device
connected to the same Ethernet network than eNod4. URL address to enter in web browser is
The default password for consultation is: 1234.
The default password for setting up is: 5555.
Passwords can be changed.
Redirection screen
Quick Start Guide SCAIME:
33
NUSG-eNod4-ETH-BOX-FE-246776-A.docx
eNod4 IP address.