Scaime eNod4-Box Ethernet Guide Rapide page 30

Touch Panel Detection
Operation Settings
Touch Buzzer Sound
Show
contrast control bar
Display settings
D-Script_debug
Function
System Language
Show System Menu
Menu and Error
Show Error Online
Error Display Position
Note: Never change the parameters in grey
8.2.2 Brightness/Contrast control
•
To display the Brightness Control Bar on the display unit, enable the setting [Show Brightness/Contrast Control Bar] in §
Display Settings.
•
Touch the upper right then left corners, or the Bottom left and right corners of the display in 0.5 seconds.
•
To end Brightness/Contrast Control mode, touch the [ X ] on the Brightness/Contrast Control Bar.
To detect touch on touching (ON) or Releasing
(OFF) the panel
Enable/Disable the in-built Buzzer sound upon a
touch
Brightness / Specify whether to display on touch the Control
Bar to adjust brightness and contrast.
Quick Start Guide SCAIME:
30
NUSG-eNod4-ETH-BOX-FE-246776-A.docx
ON
Disable
Enable
Enable
English
Lower Part
[None]
Lower Part