Zephyr Tempest I Guide D'utilisation page 20

Installation Instructions
Horizontal Ducting Conversion
A
B
20
3. Remove (4) screws from interior
of hood body attaching blower
plate to hood body. Remove
blower plate.
4. Knock out rear plates A & B for
8" round rear ducting or plate B
only for 3 1/4" x 10" rectangular
rear ducting.
5. Place blower inside hood as
shown.
Tempest I Use, Care, and Installation Guide
P R O
T E M P E S T I
U N D E R - C A B I N E T