Manufacturer's Plate; Fittings; Assembly Instructions / Inflation - Sevylor SUPERCARAVELLE XR56GTX-7 Notice D'utilisation

MANUFACTURER'S PLATE

Part of the information is marked on the manufacturer's plate affixed on the boat. The symbols used have the following
meaning:
Maximum engine power in
kilowatts
Maximum number of people on
board
Read the owner's manual before
use

FITTINGS

Illustration model Supercaravelle XR116GTX-7
Safety chamber with
4
Boston valve
Fittings for
SBM electric
motor and
MM3 motor
mount 3
2 floor
chambers with
push-in valves
Motor support
chamber with
push-in valve (only
models XR86GTX-
Main chamber
7, XR116GTX-7) with Boston
valve
1/ Oarlocks: XR56GTX/K-7, XR66GTX/K-7: 2 pcs. moulded
oarlocks; XR86GTX-7, XR116GTX-7: 4 pcs. swivel oarlocks.
2/ Seats: XR56GTX/K-7, XR66GTX/K-7: not supplied with seats;
XR86GTX-7: 1 pc.; XR116GTX-7: 2 pcs.
All models are supplied with a repair kit.
Models XR56GTXK and XR66GTXK also include a pair of aluminum oars.

ASSEMBLY INSTRUCTIONS / INFLATION

 Do not use a sharp tool !
 Any use of an air compressor will damage your product and automatically void all warranties.
For the first inflation and in order to get acquainted with your new product, inflate indoors at room temperature where the
PVC will be soft and assembly process made easier.
If it was stored at a temperature below 0°C / 32°F, leave it at 20°C / 68°F for 12 hours before unfolding. Inflate it with the
®
Sevylor supplied bellow pump (XR56GTXK-7, XR66GTXK-7) or any inflator designed for inflatable boats, rafts, pool
floats, air beds, camping mattresses, and other low pressure inflatables. These types of inflators will have a hose and
adapters to fit the valves on this product.
Swivel oarlocks
1
2
5
4
Sevytest pressure
indicator
CAUTION !
1
3
3
Swivel oarlocks 1
3/ Fittings: : XR56GTX/K-7: for SBM electric motor;
XR66GTX/K-7, XR86GTX-7, XR116GTX-7: for SBM & MM3.
4/ Safety chamber: XR56GTX/K-7, XR66GTX/K-7: supplied
with push-in valve.
5
Maximum transportable
load capacity
Recommended service
pressure
Do not use a compressor
Lateral chamber
with push-in
valve
2
Seats
Handle
(only models
XR66GTX/
K-7,
XR86GTX-7,
XR116GTX-7)
All around grab line
Lateral chamber with
push-in valve
Figure 1
E
N
G
L
I
S
H