Beurer Janonh JFT 90 Mode D'emploi page 25

The time flashes in the display (fig. 4).
• Use the MODE/MEM button to set the time and con-
firm with the LIGHT/SET button.
In the 12h format, the time is displayed as AM/PM.
The temperature measurement unit flashes in the dis-
play (fig. 5).
You can set the device to display the temperature in
degrees Celsius (°C) or degrees Fahrenheit (°F).
• To display the temperature in Celsius, select °C
using the MODE/MEM button and confirm with the
LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F
using the MODE/MEM button and confirm with the
LIGHT/SET button.
The acoustic signal symbol flashes in the display (fig. 6).
You can activate/deactivate the acoustic signals (device
activation, measurement in progress, measurement
completion).
• To activate the acoustic signals, select
MODE/MEM button and confirm with the LIGHT/
SET button.
• To deactivate the acoustic signals, select
using the MODE/MEM button and confirm with the
LIGHT/SET button.
Non-contact fever thermometer JFT 90
Fig. 4
Fig. 5
using the
Fig. 6
GB
25