Description of the Appliance
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
See fold-out page 3 for illustrations
1 Water connection with integrated sieve
2 Water filter
3 Coupling element for water connection
4 Quick coupling for high pressure hose
5 Appliance switch „0/OFF" / „I/ON"
6 Detergent suction hose (with sieve)
7 Detergent Tank
8 Detergent tank lid
9 Storage for high pressure hose
10 Carrying handle
11 Transport handle, detachable
12 Storage for spray lance
13 Storage for trigger gun
14 Mains cable with mains plug
15 Bearing wheel
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 High pressure hose
20 Spray lance with Dirtblaster
For strong contaminations
21 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the trigger gun and
turn the spray lance to the desired posi-
tion.
** Additionally required
22 Fabric-reinforced water hose with com-
mercially available coupling.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Mount loose parts delivered with appliance
prior to start-up.
See fold-out page 4 for illustrations
Illustration
Insert holder for trigger gun.
Illustration
Insert the transport handle.
Illustration
Screw the water filter on the water con-
nection of the device.
Screw the coupling element on the wa-
ter filter.
Illustration
Pull out the clamp for the high pressure
hose from the trigger gun.
Connect high pressure hose to trigger
gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
English 19