Basic Settings; Adjusting The Nozzles - Steinbach Poolrunner S63 Notice Originale

CYCLE function
11
Use this function to set the cleaning cycle.
Use the CYCLE button
ON/OFF function
12
Use this function to switch the device ON and OFF.
Use the ON/OFF button
- ON (Switches the device on and starts the selected cleaning cycle.)
- OFF (Stops the selected cleaning cycle and switches the device off at the same time.)

Basic settings

Adjusting the nozzles

The following settings are recommendations. Adapt the basic settings to the actual
properties of your pool.
0°/30°
(for most pools)
0°/40°
(to cover a large cleaning area)
to switch between the cleaning cycles.
11
to switch between the following functions:
12
1
2
35