Connecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
High temperatures can damage the control unit.
- Do not cover the control unit.
- Place the control unit in the shade, if possible.
1. Only let as much of the floating cable
all the spots in the pool.
2. Connect the plug of the floating
cable
in the right position to the
1
control unit
and screw the
5
connection together.
3. Attach the control unit
of at least A=3.5 m to the pool with the
safety rope
so that it cannot be
7
pulled into the water.
4. Connect the power plug to a grounded
socket.
The control unit is connected.
WARNING!
Risk of electric shock!
NOTICE!
into the water so that the device can reach
1
9
10
at a distance
5
1
A
7
5
5
39