Basic Settings; Adjusting The Nozzles - Steinbach Poolrunner Notice Originale

CYCLE function
11
Use this function to set the cleaning cycle.
Use the CYCLE button
ON/OFF function
Use this function to switch the device ON and OFF.
Use the ON/OFF button
- ON (Switches the device on and starts the selected cleaning cycle.)
- OFF (Stops the selected cleaning cycle and switches the device off at the same time.)

Basic settings

Adjusting the nozzles

The following settings are recommendations. Adapt the basic settings to the actual
properties and the degree of soiling of your pool.
Light soiling
Use the round reference marking on the
nozzle for adjustment.
9
1. Set one nozzle to 15° or 30° and the
other nozzle to 45°.
The device moves faster.
Exception for lightly soiled round or oval pools:
Use the setting 15°/0°.
Medium to heavy soiling
Use the oblong reference marking on the
nozzle for adjustment.
9
1. Set both nozzles to 45° or 60°.
The device moves slower.
36
to switch between the cleaning cycles.
11
12
to switch between the following functions:
12
1
9
2
9
9
9