Figure 5-9: Setup Wizard's Check The Gateway's Status Screen; Figure 5-10: Setup Wizard's Select Your Country Screen - Cisco Systems Linksys WAG54GX2 Guide Utilisateur

Wireless-G ADSL Gateway with SRX200
10. Make sure the Gateway's Power, DSL, and numbered LEDs (depending on the number of PCs connected) are
lit on its front panel. After you have done so, click the Next button.
11. You will be asked where you reside. Select the appropriate country from the drop-down menu. Then click the
Next button.
NOTE: If your country is not listed, then use the Gateway's Web-based Utility to configure your
settings. Refer to "Chapter 6: Configuring the Wireless-G ADSL Gateway with SRX200" for
instructions.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SRX200
Using the Setup Wizard
Figure 5-9: Setup Wizard's Check the Gateway's
Status Screen

Figure 5-10: Setup Wizard's Select Your Country Screen

15