Publicité
Les langues disponibles
Les langues disponibles
21
SET UP INSTRUCTIONS
STEP 3: HANDLEBAR POST AND CABLES
Slide the handlebar support cover (6) over the handlebar post (7) from below and connect the sensor cable ends
(22 & 24) and the resistance cable ends (21 & 23) between the main frame and the handlebar post. Then, carefully
and without pinching any cable, insert the handlebar post (7) into the main frame and secure this connection with
the screws (18), corrugated washers (20) and washers (15) as shown.
Publicité
Chapitres
