Set-Up Instructions - Skandika Bragi Mode D'emploi

19
SET UP INSTRUCTIONS
STEP 1: ATTACHING THE STABILIZERS
First attach the front and rear stabilizer (3=front and 2=rear) to the main frame (1). This requires 2 screws (14), 2
washers (15) and 2 nuts (16) each. Tighten the connections well. The height adjusters on the rear stabilizer (2) must
be used to compensate any unevenness of the oor. To do this, turn the adjusters until the unit stands rmly or
without wobbling on the oor. The front stabilizer (3) is equipped with rolls. These allow to move the unit from
place to place more easy (Attention: To protect the oor, place a pad underneath!).