Auto-Restart - INVENTOR EPC-09 Mode D'emploi

OPERATING INSTRUCTIONS
Adjust
Adjust
manually
manually
Adjust
Adjust
manually
manually
Fig. 4
Other features

Auto-Restart

If the unit turns off unexpectedly due to a power
outage, it will automatically restart with the previous
function settings when the power resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot restart operation
for 3 minutes. This is to protect the unit. Operation will
automatically start after 3 minutes.
POWER MANAGEMENT feature (on selected
models)
When the ambient temperature is lower than the
setting temperature, the unit will automatically operate
the power management feature. The compressor and
fan motor will stop.
When the ambient temperature is higher than the
setting temperature, the unit will automatically quit the
power management feature. The compressor and/or
fan motor will run.
Adjusting the airflow direction
Adjust the airflow direction manfully (Fig. 4):
• The louver can be manually set to the desired posi-
tion.
• Do not place any heavy objects on the louver, this
may cause damage to the unit.
• Ensure that the louver is fully opened during
operation.
10