Warranty Provisions; Eu Conformity Declaration; Proxxon (Comply With Max. Permissible Speeds) - Proxxon MOF Mode D'emploi

check the clamping effect by activating the stop lever 3. Once the
desired effect has been achieved, tighten the grub screw 1 again.

9. Warranty provisions

All PROXXON products are thoroughly inspected after production.
Should a defect occur nevertheless, please contact the dealer from
whom you purchased the product. Only the dealer is responsible for
handling all legal warranty claims which refer exclusively to materi-
al and manufacturer error.
Improper use, such as capacity overload, damage due to outside in-
fluences and normal wear are excluded from the warranty.
You will find further notes for each country regarding "Service and
Spare Parts Management" at www.proxxon.com.
10. EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: MOF
Article No.: 28568
In sole responsibility, we declare that this product conforms to the
following directives and normative documents:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 01.2010
Date: 01.12.2014
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the signatory.
– 17 –