Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Translation of the Original Operating
GB
Instructions MOF surface mill
Contents
1.
General instructions and safety regulations
2.
3.
4.
5.
6.
6.1.
6.2.
6.2.1.
6.2.2.
Replacing the cutter
6.3.
6.4.
6.4.1.
6.4.2.
Milling depth adjustment
7.
7.1.
7.1.1.
7.1.2.
7.1.3.
7.1.3.1.
7.1.3.2.
7.2.
8.
8.1.
8.2.
8.3.
9.
10.
11.
12.
Exploded view
1. General instructions and safety regulations:
Dear customer!
The use of these instructions makes it easier to get familiar with the
device, prevents malfunctions caused by improper operation, and
lengthens the service life of your device.
Please keep these instructions readily accessible at all times. Use the
device only when you have understood it exactly and always adhere
to the instructions.
PROXXON is not liable for the safe functioning of the device in cases
of:
Handling that does not conform to the usual usage, purposes of use
not designated in the instructions, and disregard of the safety instruc-
tions.
You are not entitled to guarantee claims in cases of:
operator error, inadequate maintenance.
For your own safety, please follow the safety instructions exactly.
Use only genuine PROXXON replacement parts.
We reserve the right to make improvements in the sense of techni-
cal progress. We wish you much success with the device.
Additional precautionary measures during surface milling:
•
Never use damaged or deformed milling cutters.
•
Replace worn milling cutters in due time
•
Always wear safety glasses (risk of the tool breaking)
•
Wear a dust mask if applicable.
•
Use only accessories and spare parts recommended by
13
•
Always use dust extraction (use only suitable vacuum cleaners
13
for this / fire hazard due to sparks).
13
•
Keep fingers away from rotating or quickly moving tools (mill,
14
etc.).
14
14
14
2. Legend (fig. 1)
14
14
14
1.
Housing
15
2.
Device foot
15
3.
On-off switch
15
4.
Setscrew for height adjustment
15
5.
Scale
15
6.
Guide post
15
7.
Limit stop post
15
8.
Coupling nut
16
9.
Lock-on button for shaft
10.
Locking lever
16
11.
Suction connection
16
12.
Mains cable
16
13.
Parallel limit stop
16
14.
Circular limit stop
16
15.
Guide bars
16
16
16.
Open-end wrench
16
17.
Suction hose
17
18.
Rubber connection
17
19.
Collet chuck block
4
3
3. Description of the machine:
A hand-guided surface mill is one of the most versatile power tools
in existence and the application areas are almost inexhaustible. It is
suited for milling grooves, cutting tapers, rabbet milling, profile mil-
ling, etc. The many, many possibilities often become apparent only
after working with the mill cutter. The most varied materials such as
wood, synthetics, acryl, MDF, gypsum board, etc. can be processed.
We supply corresponding and sensible accessories for you to be ab-
le to do that right from the start: a parallel inset and a circular limit
stop. A host of possible applications can be carried out with these
two tools. You will find additional information about their usage in the
instructions at hand.
The mill cutter, the rotating tool in your Proxxon surface miller driven
by a powerful universal motor, achieves a speed of 27,500 rpm and
thus enables very precise and clean work. Collet chucks for moun-
ting the mill cutter are supplied in various sizes, allowing you to use
tools with differing shank diameters.
Tool exchange is fast and comfortable thanks to the shaft lock pro-
vided with a stop button.
The foot of the MOF is made from die-cast aluminum for reasons of
stability and precision. In order to ensure optimal antifrictional pro-
perties and the greatest possible planarity, a synthetic plate is atta-
ched to the bottom.
The device itself is guided into both columns. One of these takes on
the additional function of a depth-control stop. The milling depth can
be precisely adjusted with the thumbnut after making a zero setting
- 13 -
Publicité
Chapitres
Table des Matières
