Replacing The Headlight Bulb; Replacing The Rear Light Bulb - Betamotor ALP4T 125 cc 2006 Mode D'emploi

5

REPLACING THE HEADLIGHT BULB

Remove the headlight rim after unscrew-
ing the three fixing screws.
Remove the three reflector fixing screws and
pull out the reflector.
Detach the bulb connector.
Rotate the bulb holder anticlockwise and
extract the burnt-out bulb.
Fit a new bulb taking care not to touch the
bulb to avoid impairing its function. Rotate
the bulb holder clockwise to the stop.
Refit the connector, the reflector, and the
headlight rim by following the reverse pro-
cedure to the removal.

REPLACING THE REAR LIGHT BULB

Remove the lens after unscrewing the two
fixing screws.
Replace the defective bulb.
The bulbs have bayonet bases. To remove
them, press them lightly, rotate them 30°
anticlockwise and then extract them.
GB
154