Electrical Devices - Betamotor ALP4T 125 cc 2006 Mode D'emploi

ELECTRICAL DEVICES

BATTERY
To gain access to battery (A), remove
the saddle as described on page 138.
Release rubber band (B), disconnect the
cables and remove the battery.
WARNING
To prevent damage to the electrical
system, never disconnect the cables
while the engine is running.
Reinsert battery (A) in the specially
designed recess under the saddle and
fasten it using rubber band (B).
Connect the terminal on the black cables
to the battery negative (-) terminal and
the two red cables to the battery positi-
ve (+) terminal, fitting the protective cap
as shown in the figure.
A
TO BATTERY
POSITIVE (+)
TERMINAL
(red cables)
TO BATTERY
NEGATIVE (--)
TERMINAL
(black cables)
POSITION
OF BATTERY
119
1
B
PROTECTION
GB