Display And Operating System; 10.0.10 Certification; 10.0.11 Accessories; 10.0.12 Further Documentation - Endress+Hauser iTEMP TMT184 PROFIBUS-PA Manuel De Mise En Service

TMT184
Materials
Terminals
Remote operation
Ex-certification
CE mark
Endress+Hauser
Transmitter housing: PC
Potting material: PUR
Cable up to max. 1.75 mm
10.0.9

Display and operating system

Operation via PROFIBUS-PA

10.0.10 Certification

Details regarding the availability of the Ex versions (ATEX, FM, CSA, etc.) can be obtained from
your local E+H sales organisation. All relevant data for hazardous area protection can be found in
Ex documentation, which can be requested separately.
The measurement system complies with the legal requirements laid out within the EU regulations.
E+H acknowledges successful testing of the unit by adding the CE mark.

10.0.11 Accessories

See »Accessories« on page 74.

10.0.12 Further documentation

• Brochure temperature measurement (FA006T/09/en)
• System Information PROFIBUS-PA
• Technical information iTEMP
• Ex additional documentation: ATEX (XA008R/09/a3), FM, CSA, etc.
• Operating manual 'Field Communication PROFIBUS-DP / -PA' (BA198F/00/en)
On the Internet: www.endress.com ⇒ PRODUCTS ⇒ Process Solutions ⇒ PROFIBUS
2
(secured screws)
®
using a suitable configuration or operating software.
®
(SI005S/04/en, SI027F/09/en)
®
PA TMT184 (TI079R/09/en)
10 Technical Data
81