Using The Oven - Teka HPL-870 Guide Rapide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip
control.
Caution
In the event of a power failure, your electronic
clock settings will be erased and 12:00 will
flash on the clock display. Reset the clock and
programme again.
Electronic Clock Settings
• Symbol
: Lights up during the pyrolytic
cleaning function.
• Symbol
: lights up when the clock
timer is selected.
36

Using the Oven

• Symbol
oven is programmed.
• Symbol
transmitting heat to the food.
• Sensors + / – : enable you to select a time.
• Sensors
programme the electronic clock functions.
• Sensor
direct access to recipes.
• Sensor
Setting the Time
• When you turn on the oven, you will see the
clock flashing 12:00.
• Set the clock by touching the + or – sensor.
You will hear 2 beeps confirming that the
time has been set.
• To change the time, press the + and –
sensors at the same time. The current time
will then flash on the screen. Change the
time by pressing the + or – sensors. Two
beeps will then confirm that the new time
has been set.
NOTE
The clock light has a night mode so the
display light will dim between 00:00 and
06:00.
: lights up to indicate that the
: indicates that the oven is
,
and
: enable you to
: Cooking assistant. Offers you
: Switching the oven On / Off.

Publicité

Table des Matières
loading

Table des Matières