Using The Oven - Teka HL-840 Guide Rapide D'utilisation

Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
Electronic Clock Settings
Symbol : lights up during the TEKA
Hydroclean® function.
Symbol : lights up when the clock timer
is selected.
Symbol : lights up to indicate that the
oven is programmed.
Symbol : indicates that the oven is trans-
mitting heat to the food.
+ / – Sensors : enable you to select a time.
Sensors , and
programme the electronic clock functions.

Using the Oven

Setting the Time
• When you turn on the oven, you will see the
• Set the clock by touching the + or – sensor.
• To change the time, press the + and – sen-
NOTE
The clock light has a night mode so the dis-
play light will dim between 00:00 and 6:00
hours.
Manual Operation
• After setting the clock, the oven is ready for
• During cooking, symbol
• This symbol turns itself off when the selec-
• Set the controls to
CAUTION
After cooking, you will notice that the oven
cooling system is still on. This is normal and
is used to cool the oven down quickly.
: enable you to
clock flashing 12:00.
You will hear 2 beeps confirming that the
time has been set.
sors at the same time. The current time will
then flash on the screen. Change the time
by pressing the + or – sensors. Two beeps
will then confirm that the new time has
been set.
use. Select a cooking function and temp-
erature.
indicate that heat is being transmitted to
the food.
ted temperature has been reached.
will light up to
to turn off the oven.
21