Using The Oven - Teka HSF 924 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Using the oven

TURNING oN aND REGUlaTING THE
oVEN bURNER
To light the oven burner correctly, strictly adhere
to the following instructions:
• Open the oven door fully.
• Press and turn the thermostat dial anti-clock-
wise to maximum temperature. By holding
the dial pressed, the micro switch located
behind it will create a series of sparks in the
spark plug that will cause the burner to light.
• Once the burner is lit, close the door very
carefully.
• Hold the dial pressed for 10 seconds to allow
the thermocouple located in the burner to
heat up and automatically maintain the flame
lit (observe in the slots at the bottom of the
oven).
• If after approximately 10 seconds the burner
does not light, stop and wait for at least one
minute before trying to light it again (always
keeping the door open).
• Once the burner is lit, turn the thermostat dial
to the desired level.
• Insert the tray at a medium height for best
results.
• When cooking is finished, turn off the burner
by turning the thermostat dial clockwise to
zero.
• If for any reason the flame goes out, do not
try to re-light the burner for at least one min-
ute.
ElECTRIC GRIll USE
Hold and turn the thermostat dial clockwise to
the specified position (grill).
It is advisable to heat the grill for at least 5 min-
utes before introducing the food.
Place the food to be grilled on the suitable oven
grid or in a tray with low sides. The oven grid
should be placed on the highest support (de-
pending on the size of the food to be cooked)
with the tray directly below it to collect dripping
fat. Depending on the type of food (e.g. red
meat, fish, white meat, etc.), the food will need
to be turned it so that both sides are exposed
to the infrared rays.
Cooking with the grill should not exceed 30
minutes.
CaUTIoN:
The grill will not work when the gas oven
function is selected.
User´s Guide for Gas Oven
English
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hsf 824Hsf 924 gHsf 824 g

Table des Matières