Using The Oven; Setting The Time - Teka HLD 45.15 Guide D'utilisation

boTToM CavITy
pIzza
Suitable for pizzas, following the cooking table
in the instruction manual.
ToasT
Suitable for making toast using only the grid
provided. Suitable for roasting cuts of meat.
When roasting meat, fish and vegtables, we
recommend using this function with the drip
tray.

Using the oven

CaUTIoN
The electronic clock features touch control
technology. To operate, simply touch the
glass control symbols with your fingertip.
The touch control sensitivity continuously
adapts to the ambient conditions. Make sure
the glass surface of the control panel is clean
and free of obstacles when plugging in the
oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
ELECTRoNIC CLoCk/TIMER sETTINGs
16
User's Guide
MELTED CHEEsE ToppINGs
Heat only comes from the upper part. Suitable
for toasting and browning.
waRMING
Heat only comes from the lower part. Suitable
for warming plates and defrosting food.
Symbol: lights up when the clock/timer is
selected.
Symbol: lights up to indicate that the oven
is programmed.
AUTO Symbol: indicates that the oven is
trans-mitting heat to the food.
+ / – Sensors: enable you to select a time.
, y Sensors: enable you to pro-
gramme the electronic clock/timer functions.
Sensor: enables you to change visible infor-
mation and select clock/timer settings between
the top and bottom cavities
Symbols: Lights up when the top cavity
is chosen.
Symbols: lights up when the bottom
cavity is chosen

sETTING THE TIME

• When you plug in the oven, you will see the
clock flashing 12:00.
• Set the clock by touching the + or – sensor.
You will hear 2 beeps confirming that the time
has been set.