Connections; About The Audio Connection; Analog Audio Output Connections; Digital Audio Connections - Pioneer ELITE N-50 Mode D'emploi

02

Connections

Chapter 2:
Connections
• Be sure to turn off the power and unplug the power
cord from the power outlet whenever making or
changing connections.
• Connect the power cord after all the connections
between devices have been completed.

About the audio connection

Types of cables and Transferable audio
terminals signals
Digital (Coaxial) Conventional
digital audio
Digital (Optical)
RCA (Analog) Conventional
(White/Red) analog audio
6
En

Analog audio output connections

By connecting this unit's analog audio output to the
analog audio input of an amplifier, you can use the
amplifier to enjoy analog audio produced from this unit.
AUDIO INPUT
R ANALOG L
Amplifier
DIGITAL OUT
ANALOG OUT
OPTICAL
R L
LAN (10/100)

Digital audio connections

Digital audio output connections

By connecting this unit's digital audio output to the
digital audio input of an AV receiver or D/A converter,
etc, you can use the amplifier to enjoy digital audio
produced from this unit.
AV receiver, D/A
converter, etc.
DIGITAL IN
OPTICAL
AV receiver, D/A
converter, etc.
COAXIAL
D
for W
(OUTPUT 5V
0.6A MAX)
ANALOG OUT
R L
Note
• Digital signal formats that can be output from this
unit include linear PCM signals with sampling rate
and quantitative bits up to 192 kHz/24 bits
(Depending on the connected device and
environment, operation may not be successful).
• Digital audio signals that can be output from this
unit's DIGITAL OUT connectors include the
following inputs: iPod, Internet Radio, USB, Music
Server, Digital In 1 and Digital In 2.

Digital audio input connections

N-50 only:
By connecting a digital audio component's audio output
to this unit's digital audio input, this unit can be used as
a D/A converter. For details regarding the audio output
of signals input to the DIGITAL IN connectors, see the
section Using the D/A converter on page 18.
DIGITAL OUT
OPTICAL
DIGITAL IN
COAXIAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
2
AL OUT DIGITAL IN ADAPTER PORT
(OUTPUT 5V
2 1
0.1A MAX)
OPTICAL COAXIAL OPTI
LAN (10/100) DC OUT
COAXIAL OPTICAL COAXIAL
for WIRELES
DC OUTPUT DIGITAL IN
(OUTPUT 5V for WIRELESS LAN
0.6A MAX)
(OUTPUT 5V
0.6A MAX)
USB
Note
• Digital signal formats that can be input to this unit
include linear PCM signals with sampling rate and
quantitative bits up to 192 kHz/24 bits. (Depending
on the connected device and environment,
operation may not be successful).
Digital audio
equipment, etc.
Digital audio
equipment, etc.
AC IN