Operation; Operating Controls - Sennheiser evolution wireless Série Mode D'emploi

66
6

Operation

Transmitters and receivers of the Sennheiser evolution wireless series ew 100
have been factory-preset to allow immediate use after switch-on (u "5 Pre-
paring the devices for use"). Please note, however, that the transmitter
sensitivity is dependent on the application. To avoid overmodulation and
distortion, please first check whether the preset sensitivity is suitable for
your particular application (u "Adjusting the sensitivity").

Operating controls

Press the ON/OFF
ON/OFF
switch the transmitters and receivers on or off.
POWER
MUTE Use the MUTE
without switching off the transmitter.
SET Press the SET
– to select a menu,
– to change to the next menu,
– to return to the top menu level.
Press the UP button
– to adjust the setting of a menu.
Press the DOWN
– to adjust the setting of a menu.
button or the POWER
switch (transmitters only) to noiselessly mute the audio signal
button
button
button (EM 100 receiver only) to