Honda GX25 Mode D'emploi page 14

GX35
Standard Type:
Spark Arrester Removal
1. Loosen the 5 mm hex bolt, then remove the top cover (see
page 11).
2. Remove the 4×6 mm self-tapping screws from the spark
arrester, and remove the spark arrester and exhaust filter from
the muffler.
MUFFLER
SPARK ARRESTER
OUTLET
EXHAUST
FILTER
×
4 6 mm
SELF-TAPPING
SCREWS SPARK ARRESTER
Exhaust Filter Cleaning & Inspection
Pinch the exhaust filter, and strike it lightly with a finger, to remove
carbon deposits. Be careful not to strike it too hard. The exhaust
filter must be free of breaks and holes. If it is damaged or fouled
excessively, have it serviced by your Honda dealer.
Spark Arrester Cleaning & Inspection
1. Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace
the spark arrester if it is damaged.
2. Install the exhaust filter and spark arrester in the reverse order
of disassembly.
When you install the spark arrester, the spark arrester's outlet
must point to the side opposite the spark plug.
3. Install the top cover, and tighten the 5 mm hex bolt securely
(see page 11).
14
SPARK PLUG
SPARK ARRESTER SCREEN
Tiller type:
Spark Arrester Removal
1. Loosen the 5 mm hex bolt, then remove the top cover (see
page 11).
2. Remove the 4×6 mm self-tapping screws from the spark
arrester, and remove the spark arrester from the muffler.
MUFFLER
EXHAUST FILTER
SPARK ARRESTER
×
4 6 mm
SELF-TAPPING
SCREWS
Exhaust Filter Cleaning & Inspection
Pinch the exhaust filter, and strike it lightly with a finger, to remove
carbon deposits. Be careful not to strike it too hard. The exhaust
filter must be free of breaks and holes. If it is damaged or fouled
excessively, have it serviced by your Honda dealer.
Spark Arrester Cleaning & Inspection
1. Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace
the spark arrester if it is damaged.
2. Install the exhaust filter and spark arrester in the reverse order
of disassembly.
When you install the spark arrester, the spark arrester's outlet
must point to the side opposite the spark plug.
3. Install the top cover, and tighten the 5 mm hex bolt securely
(see page 11).
ENGLISH
SPARK PLUG
SPARK ARRESTER SCREEN