Spark Arrester - Honda GX25 Mode D'emploi

SPARK ARRESTER (applicable types)
The spark arrester may be standard or an optional part, depending
on the engine type. In some areas, it is illegal to operate an engine
without a spark arrester. Check local laws and regulations. A spark
arrester is available from authorized Honda servicing dealers.
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
If the engine has been running, the muffler will be hot. Allow it to
cool before servicing the spark arrester.
GX25
Standard/Pump type:
Spark Arrester Removal
1. Loosen the 5 mm hex bolt, then remove the top cover (see
page 11).
2. Remove the 4 mm screws from the spark arrester, and remove
the spark arrester from the muffler.
MUFFLER
4 mm SCREWS

SPARK ARRESTER

Spark Arrester Cleaning & Inspection
1. Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace
the spark arrester if it is damaged.
SPARK ARRESTER SCREEN
2. Install the spark arrester in the reverse order of disassembly.
When you install the spark arrester, the spark arrester's outlet
must point to the side opposite the spark plug.
3. Install the top cover, and tighten the 5 mm hex bolt securely
(see page 11).
Tiller type
Spark Arrester Removal
1. Loosen the 5 mm hex bolt, then remove the top cover (see
page 11).
2. Remove the 3×6 mm self-tapping screw from the spark
arrester, and remove the spark arrester from the muffler.
SPARK PLUG
Spark Arrester Cleaning & Inspection
1. Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace
the spark arrester if it is damaged.
2. Install the spark arrester in the reverse order of disassembly.
3. Install the top cover, and tighten the 5 mm hex bolt securely
(see page 11).
ENGLISH
×
3 6 mm SELF-TAPPING SCREW
SPARK ARRESTER
SPARK ARRESTER SCREEN
MUFFLER
13