Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12
The «DISTANCE» dial (placed on the side of the camera) can
adjust the sensitivity of the detector. The camera is equipped with a
detector sensitive to infrared. The system detects only heat sources
in motion. The greater the mass of heat, more sensitive is the
system. Range of detector is between 5 and 50 feet. The best way to
adjust the distance is to set the camera in «SET/TEST» mode (see
above). Make sure to have the least possible objects in front of the
camera during the positioning. This prevents picture taken by the
camera when oriented towards the sun while an object moves in
front of the camera (eg. a branch)
SOUND RECORDING
The camera offers the possibility to record the sound in
«VIDEO» mode. When the «VIDEO» mode is selected, the camera
automatically records the sound. Under the camera, you can find a
rubber cap with the inscription MIC. If the user does not want to
record the sound, the rubber cap needs to stay in place. If the sound
recording is required, the user must lift the rubber cap and turned it
slightly so that the microphone receiver is completely cleared (See
figure below).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera «OFF» and connect the USB cable (supplied)
from the camera and to your computer. The computer will
recognize the camera and install the software itself. Click on
«My Computer» and select «Removable Disk». Then click
«DCIM»
and
«100DSCIM»
and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built into
the computer, a multi-card reader RD25-1 (sold separately) must
be used.
to
find
all
your
photos
REMOS TECHNOLOGY
This Remos compatible camera benefits from wireless capabilities
and can be combined with:
• RC-1 ― Remote control (control of the camera remotely)
• MS-1 ― Motion sensor (trigger of the camera remotely)
• IRB-W ― Infrared Booster (increases the lighting power)
Refer to the section «Settings» for details
Note: The optional steel security box (SB-91) affects wireless
functionalities of products compatible with Remos technology.
TROUBLESHOOTING
No person / animal on photos
1.
Rising sun or sunset can trigger sensor. Camera must be
reoriented.
2.
At night, motion detector may detect beyond range of
the IR of flash illumination. Reduce distance setting.
3.
Small animals may be triggering unit. Reduce distance
setting and/or raise height of camera.
4.
Motion detector may sense animals through foliage.
5.
If person/animal moves quickly, it may move out of
the camera's field of view before photo is taken. Move
camera further back or redirect camera. Camera must
be set on a stable and immovable object i.e. large tree.
6.
Make sure the mounting post or tree is stable and does
not move.
Red light in front of camera blinks
1.
«MODE» switch is in «SET/TEST».
2.
«MODE» switch is in «PHOTO »or «VIDEO». Red
light on the front of the camera flashes for 60 seconds
to allow the user to leave without being photographed
or filmed.
The camera screen turns off
The camera may be set to «PHOTO» or «VIDEO» mode and
the screen turns off after a period of 60 seconds in order to
preserve battery life.
13
Publicité
Table des Matières
