Led Indication - BenQ LU9915 Guide D'installation

LED indication

Indicator messages
Several indicator messages are used by the projector to alert users about problems with setup or
system error. The LEDs on top cover of the projector illustrated below.
TEMP LED
LED display
Off
Flashing
LIGHT SOURCE LED
LED display
Off
Flashing
On
STATUS LED indicator
LED display
Close
Flashing
Lights up
16
BenQ_LU9915_Installation Guide.indb 16
Projector status
Normal status
Red Over temperature error
Projector status
Light source is off
Green Projector is turning on
Red (Cycles of
Light source is end-of-life Please call the local service center.
6)
Red Light source problem
Green Light source is on
Projector status
Normal
Red (once) Safety switch error
Red
Fan error
(quadruple)
Red System error
Operation tips
Contact with your nearest authorized dealer or service
center.
Operation tips
Please call the local service center.
Operation tips
Please check whether the top cover is well assembled
or lens is well installed or not. If the problem persists,
call the local service center.
Call the local service center.
Call the local service center.
2017/10/20 下午 03:47:24