Hortensus 8FT Mode D'emploi page 18

7. Remove the trampoline padding if necessary. Secure the bottom of the enclosure netting
to the rings of mat on the trampoline using the rope. Tie one end of the rope to one
jumping mat eyelet, thread the rope through the holes in bottom of the enclosure netting.
You also need to thread it through the eyelets of the trampoline mat to secure it in place
to the trampoline.
8. Securely tie both ends of the rope together or tie to the eyelet.
9. Zip the entrance close, and fasten all the
entrance hooks. Supervisors must re-zip
and re-hook all the entrance hooks
securely before jumping begins.
For dis-assembly, please follow the assembly instructions in reverse order.
10. Your trampoline now looks like this.
Proceed to testing the trampoline section
of this manual before jumping on the
trampoline.