Hortensus 8FT Mode D'emploi page 17

SAFETY ENLOSURE ASSEMBLY
Refer to SAFETY ENCLOSURE PARTS LIST for identification of parts.
WARNING:
Two adults in good physical condition are required for following assembly. For your safety, you
should wear proper shoes and clothing.
Failure to follow these instructions and warning may result in injury.
NOTE:
Picture may vary slightly with the different trampoline models.
1. Insert the lower pole into the upper pole,
repeat for all poles.
3. Insert the black cap into the upper pole,
locked by pinball. Repeat for all poles.
5. You may need another person to hold the
enclosure pole in place while you clamp
the pole to leg supports in the next step.
2. Place the safety enclosure mesh on
trampoline tidily, as shown above, ready
for the next step.
4. Connect the fiber rod into two sections.
Insert two fiber rods into the top sleeve
of safety net by two people. Bend the
fiber rod into a circle.
6. Use the quick clamp to secure the
enclosure pole to the hole of the leg
extension and the hole of T bar.