Safety Instructions - HBM WE2111 Mode D'emploi

1

Safety instructions

4
Proper use
The device is to be used exclusively as a component for
a scale and directly related control tasks within the
application limits detailed in the specifications. Use for
any purpose other than the above is deemed to be
non-designated use.
Everyone involved with siting, starting up, or operating
the device must have read and understood the operating
manual and in particular the technical safety instructions.
In the interests of safety, the device should only be
operated by qualified personnel and as described in the
Operating Manual. It is also essential to comply with the
legal and safety requirements for the application
concerned during use. The same applies to the use of
accessories.
The device is not intended for use as a safety
component. Please also refer to the section: "Additional
safety precautions". Proper and safe operation requires
proper transportation, correct storage, siting and
mounting, and careful operation.
Operating conditions
S Protect the device from direct contact with water.
S Protect the device from moisture and weather such as
rain or snow. The device degree of protection is IP20
(DIN EN 60529), the front plate degree of protection
is IP66.
S Do not expose the device to direct sunlight.
S Protect the device against impact/shock loads and
strong vibrations.
WE2111
A3983-1.0 en/de/fr