HBM WE2111 Mode D'emploi page 33

WE2111
A3983-1.0 en/de/fr
"
Use the and
10 kg in this case.
"
Load the scale with 10 kg and press the
S in P is displayed as long as the zero balance is
being performed. 10.00 flashes in the display when
the adjustment has been performed.
"
Press the
"
Press the
settings.
The following are displayed in sequence before the
actual measured value appears: SAviNG, firmware
version (e.g. P60c) and calibration counter (e.g.
C00008).
buttons to enter the weight used,
button to quit the menu.
button for several seconds to save the
button.
33