HBM WE2111 Mode D'emploi page 5

WE2111
A3983-1.0 en/de/fr
S Comply with the maximum permissible ambient
temperatures and maximum humidity figures stated in
the specifications.
S The device must not be modified from the design or
safety engineering point of view except with our
express agreement. In particular, any repair or
soldering work on motherboards (replacement of
components) is prohibited. When exchanging
complete modules, use only original parts from HBM.
S The device is delivered from the factory with a fixed
hardware and software configuration. Changes can
only be made within the possibilities documented in
the manuals.
S The device is intended for use in industrial
environments and corresponds to Class A in
compliance with DIN EN 55011.
S The device is maintenance-free.
S Please note the following points when cleaning the
housing:
- Disconnect the device from all current and voltage
supplies before cleaning it.
- Clean the housing with a soft, slightly damp (not
wet!) cloth. You should never use solvents, since
these could damage the labeling or the housing.
- When cleaning, ensure that no liquid gets into the
device or connections.
S In accordance with national and local environmental
protection and material recovery and recycling
regulations, old equipment that can no longer be used
must be disposed of separately and not with normal
household garbage, see Chapter 11, Page 34.
5