Güde GESF 400 Traduction Du Mode D'emploi D'origine page 18

Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible.
Protect the injured person from other injuries and calm
him/her down.
First aid kit must always be available in the place of
your work in case of accident in accordance with DIN
13164. Material taken out of the first aid kit needs to be
supplemented right away.
If help is needed,
please provide the following details:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" chapter.
Transport package disposal
The package protects the appliance against damage
during transport. Packing materials are usually chosen
depending on their environmental friendliness and disposal
method and can therefore be recycled.
Returning the package to material circulation saves raw
materials and reduces waste disposal costs.
Parts of packages (e.g. foils, styropor) can be dangerous
to children. Risk of suffocation!
Keep parts of packages away from children and dispose
them as soon as possible
Operating staff requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by a qualified
person.
Minimum age
The appliance may only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under teacher's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Servicing
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Service part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Maintenance and storing
To provide protection against injury, do the following
before maintenance:

Switch off the engine.

Wait until all rotating parts fully stop.

Unplug the appliance.

Let the engine cool down (app. 30 minutes).
To provide protection against injury, do the following
before cleaning:

Switch off the engine.

Wait until all rotating parts fully stop.

Unplug the appliance.

Let the engine cool down (app. 30 minutes).

Do not spray water on the appliance as electrical
components could get damaged.
If the appliance is not used for more than one month,
e.g. after the season is over:

Clean the appliance.

To protect all metal parts against corrosion, wipe
them with an oil-soaked cloth or spray with oil in
a spray gun.

Store the appliance in a clean and dry room.
Keep the appliance cover with no dust and dirt.
For cleaning purposes, use a soft cloth and fine soap
solution. Prevent direct appliance contact with aggressive
cleaning agents. Aggressive, volatile and caustic cleaning
agents must not be used.
Have the electric snow blower checked by a qualified
authorised expert once a year.
The appliance needs to be protected against moisture and
dust.
If the appliance is not used for a long time, store it in a
covered state in a dry, safe place inapproachable to
children.
Troubleshooting
The table below shows potential failures, their possible
cause and removal options. If the problem still cannot be
removed, contact a professional for help.
Switch the appliance off and unplug it before
maintenance and cleaning.
Risk of electric shock.
Symptom Possible cause
Feeder cable is not
connected or is faulty
Engine not
starting
18
Removal
Check the
cable, plug it or
replace it or
have it repaired
by a
professional if