Before Using For The First Time - Siemens TK 91 N 01 Notice D'utilisation

en
Important notes
– Fill the water tank 5 only with cold mains
water, and change daily.
– Only place Nespresso capsules on the
"balcony" 16. Other objects may damage
the appliance.
– Do not obstruct the window with objects
or your hand, and do not remove it.
– Do not insert or place any objects on or
in the balcony with the capsule insertion
aperture 16.
– The Nespresso capsules must be
undamaged before use. Capsules which
are distorted or open could jam and
damage the appliance.
Protection against frost: In order to avoid
the effects of frost, the appliance must be
completely drained prior to transport or
storage.
● Switch on the appliance,
in the display
● Press the steam button
● If the display shows
remove the water tank and empty.
● Press the steam button
● Wait until the appliance stops pumping.
● Tip the remaining water out of the drip
trays 11 and 12, and switch the appliance
off at the ON/OFF switch 17.
NESPRESSO capsules
Use only Nespresso capsules with this
appliance.
Address for orders:
Nespresso-Club, www.nespresso.com
14
appears
Ready
.
h
,
Steam ready
once more.
h
Before using for the first
time
Putting the appliance into operation
● Plug into mains supply.
● Fill the water tank 5 with fresh, cold water,
with the lid 4 removed, or through the
grille in the lid, and mount in position.
● Set switch 17 to I. The blue ring b
surrounding button
opens and closes.
● Press button (Stand by). Window 2
a
opens.
The ex works setting for the display shows
and
Sprache Deutsch
To set a different language, use the button
- or + to select the desired language
e f
and store with steam button
● To confirm
English
Press the steam button
● Press button (Stand by).
a
will now appear in the display,
Wait
followed by
Rinsing
performed automatically.
● Rinse the appliance without a Nespresso
capsule in position. To do this, place a
sufficiently large vessel under the coffee
dispenser 14, and press button
cup).
● Repeat this procedure 4 times.
● Empty the collecting vessel and place it
under the frothing attachment 9.
● Press button
g
approx. 0.5 l water
The appliance is now ready for operation.
appears in the display.
Ready
Info: If
English
confirmed, and a different language is
desired, see under "Changing basic
settings".
lights up. Window 2
a
alternately.
.
h
:
.
h
. Appliance rinsing is
f
(hot water), and draw
has already been
(large