Symbols - PANCONTROL PAN Leckstromzange Manuel D'utilisation

‐ Never connect the test leads of the device to a voltage source, if the
rotary switch is set to measure current, resistance or test diodes. This
can damage the device.
‐ If the battery symbol appears in the display, replace the battery
immediately.
‐ Always switch off the device and disconnect the test leads before
opening the device to replace batteries or fuses.
‐ Never use the device with the rear cover removed or with the battery
and fuse compartment open!
‐ Do not use the device near strong magnetic fields (for e.g. welding
transformer), as this can distort the display.
Do not use the device outdoors, in humid surroundings or in
environments that are subjected to extreme temperature
fluctuations.
‐ Do not store the device in places which are exposed to direct
sunlight.
‐ Remove the battery if the device is not used for a long time.
‐ If changes or modifications are made to the device, the operational
safety is no longer guaranteed.
3. Symbols Description
Conforms to the relevant European Union directive (EN‐61010)
Product is protected by double insulation
Risk of Danger. Important information See instruction manual
Caution! Hazardous voltage. Risk of electric shock.
EN 5