Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Installation Procedures
First complete the electrical connections, and then check for correctness.
Reset
Press
button to flip down the panel. Then press the RESET button with a pointed object to reset
the unit to the original status.
Note: Press the RESET button will erase the clock and stored stations.
Installation Opening
This unit can be installed in any dashboard having an opening as shown below.
The dashboard should be 4.75mm - 5.56mm thick in order to be able
to support the unit.
IMPORTANT:
Remove these two screws before installation. Otherwise, the DVD player will not work.
1. Inset mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.
Make sure that lock lever
2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion.
3. Insert trim plate.
is flush with the mounting collar (not projecting outward).
Mounting bolt
rubber cushion.
59
RESET
Lock lever
GB
Publicité
Table des Matières
