Charging The Battery; Functions Of The Buttons - SilverCrest SBLH 10 A1 Mode D'emploi

5.1 Charging the battery

1. Connect the Micro USB plug of the USB
charger cable 11 to the Micro USB
port 14 of the device.
2. Connect the USB A plug of the USB
charger cable 11 with a USB power
unit (not included in the items sup-
plied). The LED 8 is lit red. It goes out
when the battery is fully charged.
NOTE: if the device is switched on during
charging of the battery, the LED will be lit
light red.

5.2 Functions of the buttons

NOTES:
• When the maximum volume is
reached, the loudspeaker signals this
with a sound.
• It is possible that not all of the func-
tions will be supported by all mobile
telephones.
52
GB