Listening To The Other External Components; Function Settings - Kenwood KDC-HD548U Mode D'emploi

Listening to the other external
components
Preparation : Make sure [ON1] or [ON2] is selected for [BUILT-IN AUX]. (page 6)
1 Press SRC to select "AUX."
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.

Function settings

1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
Repeat step 3 until the desired item is selected/activated.
Press to return to the previous item.
4 Hold to finish the procedure.
[AUDIO CONTROL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS BOOST B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to
the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
12
Portable audio device
(commercially available)
Selectable setting (Preset: *)
Auxiliary input jack
3.5 mm (3/16") stereo mini plug
(commercially available)