Belkin F5D7230-4 Manuel De L'utilisateur page 38

Alternate Setup Method Alternate Setup Method
Setting your Connection Type if you are a Telstra
[Australia Only]. Your user name and password are provided to you
by Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu
IP address. If your login server address is different than the one
provided here, you may manually enter the login server IP address by
placing a check in the box next to "User decide login server manually"
(4)
and type in the address next to "Login Server"
have entered all of your information, click "Apply Changes"
After you apply the changes, the "Internet Status" indicator will read
"connection OK" if your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
1. Select your State
Select your state from the drop-down menu
Server" box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See "User decide login server manually"
2. User Name
Provided by your ISP. Type in your user name here.
(6)
will automatically fill in your login server
36 36
BigPond User
®
(5)
. When you
(7)
.
(6)
(7)
(6)
. The "Login
(4)
.