Technical Details - Vaude BADAWI LONG 6P Mode D'emploi

tent's coating and waterproofing.
Use a brush to rub nikwax tech Wash in a 1:4 ratio
with water on stubborn stains. Follow up with
nikwax tent & gear Solarproof waterproofing,
applying generously to the area cleaned.
• When on the road, repair tears in the tent wall
with repair tape and seal from the inside with a PU
or silicon seam sealer. The seam should however
be correctly repaired as soon as possible in order
to prevent further tearing. Please contact your
retailer to do this.
• Tent pole shock cords can be retightened if neces-
sary (elasticity can wear out in very cold conditions
or due to aging). To do this first remove the end cap
and then untie the knot in the cord. Retie the knot
further up the cord and replace the cap (W).

tEcHnIcAl DEtAIlS:

Depending on tent models, VAUDE tents feature
the following:
flY:
CLASSIC 75D POLYESTER 185T PU; 3000 MM WATER
COLUMN.
• 70D polyester PU – reliable PU coated polyester
backing material.
TECHNICAL COTTON CO/PES 65/35%
• breathable cotton/polyester blended fabric.
• Watertight when interior is not touched.
Tear resistance: 60N
InnEr tEnt:
70D POLYAMIDE RIPSTOP 190T.
• Abrasion and tear resistant polyamide fabric.
ENGLISH
13