Table des Matières
Publicité
Key Position Adjustment
Maximum speed setting
650spm
Sewing Light
Auto Thread Cutter
Register
Key Position Adjustment
PRESS MARK ( )
Key Position Adjustment
Key Position Adjustment
8
Maximum speed setting
650spm
9
Sewing Light
Auto Thread Cutter
10
Register
7
Yes
SET
+
OFF
ON
X
+
.
END
Yes
SET
+
OFF
ON
X
7. Adjust key positions
If the touch keys in the LCD touch screen do not
react to your touch, the keys may need to be
adjusted or realigned.
Touch the "Yes" key to open the key position
adjustment window.
The first of five black plus (+) symbols will
appear. Touch the black symbols in the order that
they appear.
After the fifth black symbol is touched, the END
message appears. Wait a few moments and the
set preference window reappears.
8. Set maximum embroidery speed
The embroidery speed can be adjusted from 400
spm to 750 spm maximum. The default setting is
650 spm (stitches per minute). Designs featuring
narrow zigzag stitches may need to be sewn at a
slower speed for best results. Touch the "–" key
to decrease and "+" key to increase.
9. Sewing light
You can operate the machine with the sewing
light on or off. Touch this key to change between
the two settings.
10. Auto thread cutter
If the auto thread cutter command is enabled,
the machine will stop and cut the threads
automatically when each color section is
finished.
Press the ON key to enable auto thread cutter.
Press the OFF key to disable auto thread cutter.
Touch the "Next" key.
24
Publicité
Table des Matières
